Machine Information; Technical Specifications - VONROC SG502DC Bersetzung Der Originalbetriebsanleitung

EN
SAFETY WARNINGS FOR CHARGER
Intended use
Charge only CD801AA and CD803AA type recharge-
able Battery packs with the charger. Other types
of batteries may burst causing personal injury and
damage.
a) The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been
given supervision or instruction.
b) Children being supervised not to play with the
appliance.
c) Do not recharging non-rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!
Electrical safety
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable for
the power rating of the machine with a minimum
thickness of 1.5 mm
cable reel, always fully unroll the cable.

2. MACHINE INFORMATION

Intended use
The spray gun is intended for painting and var-
nishing work in a domestic setting. The spray gun
is suitable for water, oil and solvent based paint/
varnish/stains, It is recommended to use environ-
mentally friendly paints and solvents. Only use the
spray gun for its intended purpose. Do not use the
machine to do other things outside of the descri-
bed scope in this manual. The machine product
is not intended for professional or industrial use.
Be aware of the safety warnings and do not use
the later products, acid coating product, granula,
products, corrosive products, caustic products. It is
also not intended to use for spraying plant protec-
tion products for the treatment of plants or garden,
as well as for spraying paint, ink or other materials
on human or animal body.
8
. If you use an extension
2

TECHNICAL SPECIFICATIONS

This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Batteries
Model No.
included
SG502DC
-
S_SG502DC
CD801AA
S2_SG502DC
2 x CD801AA
S3_SG502DC
CD803AA
Machine information
Voltage
Maximum water flow rate
Max paint flow
Viscosity
Container capacity
Nozzle diameter
Weight
Lpa (Sound pressure level)
Lwa (Sound power level)
Vibration
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No.
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
Chargers
included
-
CD802AA
CD802AA
CD802AA
20V
500 ml/min
100-200ml/min
Max 70 DIN/s
800 ml
1mm, 1.8mm & 2.5mm
0.84 kg
81.1 dB(A) K=3dB(A)
92.1 dB(A) K=3dB(A)
2.578m/s2 K=1.5 m/s2
CD801AA
Lithium-Ion
20V
2.0 Ah
CD802AA
0.3 kg
CD802AA
220-240V, 50Hz 0.4A
21V 2.5A
60 minutes
120 minutes
CD801AA, CD803AA
0.36 kg
WWW.VONROC.COM