Maintenance - Altana BYK byko-spectra pro Kurzbedienungsanleitung

BYK-Gardner GmbH

7 Maintenance

Disconnect power cord before cleaning the light booth or replacing
lamps. Lamps are hot after use! Let them cool down first.
Cleaning
To clean the neutral gray surface or diffuser, use a soft, damp cloth
with a water based mild soap or detergent. Allow to air dry. Release
the latch to reach the inner side of the diffuser.
Lamp replacement procedure
Remove the front panel of the light booth. Release diffuser to reach
lamps. To protect the lamps, only touch them with gloves.
Lamp type
Daylight (D65)
Horizon (HZ) /
Incandescent (A)
CWF / TL84 / U30 /
Ultra-violet (UV)
301 300 039 - 2007
Lifetime Replacement note
600 hrs Please contact our technical service
for replacement.
600 hrs Please push one end of the lamp
into the spring-loaded socket and re-
lease the other end.
2000 hrs Please rotate the tube 90 degrees to
loosen it.
byko-spectra pro
11