Technical Data - Inventum IMC6250BK Gebrauchsanleitung

ELECTRICAL CONNECTION
The mains voltage must correspond with the voltage shown on the information plate in the appliance.
In the meter cupboard, the groups must each be protected with a 16 Ampere fuse at least. The connection cable must have
a core cross section of at least 2.5 mm² and a length of 1.5 m. If the cable is too short, you cannot connect the appliance and
place it against the wall before you want to insert the plug in the socket.
BUILDING - IN THE OVEN
• Check that the kitchen furniture and recess meet the set requirements in
relation to dimensions.
• Slide the oven in the kitchen furniture. Check that the base unit does not make
contact with the walls of the kitchen furniture. Make sure there is a space of
at least 2 mm between the base unit and the walls of the kitchen furniture.
Make sure the oven is in a central position between the walls of the kitchen
furniture. Caution: make sure that the connection cable does not get jammed
and does not lie on top of the appliance.
• Open the door of the appliance.
• Use the provided screws to fasten the appliance to the side walls of the kitchen
furniture.
• The opening between the cabinet and the top of the oven should not be closed.
This opening is needed for ventilation.
• Close the door of the appliance and insert the plug in the socket.
• The oven is now ready for use.

technical data

Product
Connection voltage
Connected load
Microwave power
Ampere
Oven capacity
External dimensions without handle
Nett weight
36 • English
Inventum IMC6250BK
230 V ~50Hz
3000W
900W
16A
50 L
454 x 595 x 565 mm (HxWxD)
39,2 kg