10
MOUNTING TO THE TRACTOR
MOUNTING TO THE TRACTOR
MOUNTING THE MOWER TO THE
TRACTOR
To avoid personal injury:
A Park the tractor on a firm, flat and level surface,
set the parking brake, stop the engine and
remove the key.
1. Park the tractor on a firm, flat and level surface and set
the parking brake.
2. Move the hydraulic control lever rearward to raise the
mower rear link to the highest position.
3. Stop the engine and remove the key.
4. Roll the mower under the tractor from right side.
(1) Hydraulic control lever
5. Mounting the universal joint.
Pull back the coupler of the universal joint.
Push the universal joint onto the PTO shaft until the
coupler locks.
Slide the universal joint back and forth until the
universal joint is locked securely.
A Finally, tug on the universal joint to make sure it is
locked on the PTO shaft.
(1) Mid PTO
(2) Universal joint
(3) Coupler
(A) "TUG"