Warnings And Cautions - Samoa 391020.270 Anleitung

EN
DESCRIPTION
This single pump hoist facilitates drum change-over, by lifting the
pump from an empty drum and lowering it into a new drum with
minimum effort. It rotates 360° to access up three drums. Operated by
compressed air, this unit uses an air-powered cylinder connected to the
floor.
Different pump mounting options are available to fit Samoa pumps for
most applications. It is typically use with in conjunction with a follower
plate which connects to the pump inlet, the wiper seal protect the

WARNINGS AND CAUTIONS

WARNING: This symbol aware of serious bodily injury or death
!
if you ignore the warning described.
READ BEFORE USE
WARNING: Read all instruction manuals, tags, and labels
!
before operating the equipment. This equipment is for
professional use only.
Do not alter or modify this equipment. Use genuine components
provided from SAMOA Industrial, S.A.
The non compatible fluids may cause damage in the pump and
serious personal injury.
The pump generates high or very high pressures. Do not
exceed the maximum air inlet pressure of 8 bar (116 psi).
Do not try to use the unit until you have taken all possible
precautions to guarantee that the unit has been installed
correctly and that the base has been firmly secured to the
concrete floor.
Avoid electrical discharges. Ensure there are no electrical cables,
devices or accessories above the hoist. Examine the work area
and take the measures necessary to ensure that enough space
is maintained for the installation of the hoist and for the pump
to be lifted as much as possible and that they work correctly.
2
854 807 R. 09/20
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
material in container from outside contamination and drying while
wiping the container's sides clean. It may use with drum cover if the
pump is connected to the lift.
This unit includes hand pneumatic valves which control the pump lift
up/down movement and on/off pump control.
Fig. 1
CAUTION: This symbol aware of serious bodily injury or death
!
if you ignore the warning described.
Maintain a minimum safety distance when raising and lowering the
inductor. Do not get too close; operate it from a safe place, so you
cannot get trapped between the unit and its mobile elements. Take care
when inserting the inductor plate into the drum.
When not in use, be sure to shut off the air supply to avoid accidents.
Check that all the operators that work with this unit have been trained
in safe working practices, that they understand their limitations and use
safety equipment when required.
If follower plate is jammed with the drum. Be careful in the extraction,
the unit could move violently and unexpectedly.
Any unauthorized tampering with this equipment or removal of labels
may invalidate the guarantee.