Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Care & Maintenance
EN
Cleaning the HEPA Filter
It is recommended to clean the HEPA filter once every 4 to 6 months.
1. Remove the dust cup as shown in the
figure.
3. Clean the HEPA filter with clean water.
Make sure you rotate the HEPA filter 360°
to thoroughly and remove all dust caught
in the filter. Lightly tap the filter several
times to remove any excess dirt.
Note:
• Only use clean water to wash the filter. Do not use detergent.
• Do not attempt to clean the HEPA filter with a brush or finger.
18
2
2. Remove the HEPA filter from the
vacuum by pulling it down in the direction
shown in the figure.
1
4. Allow the HEPA filter to air dry for 24
hours.
12
12
11
11
1
1
10
10
2
2
24 hrs
24 hrs
9
9
3
3
8
8
4
4
7
7
5
5
6
6
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
