Honeywell CS10PE Benutzerhandbuch Seite 4

USE & OPERATION (CONTINUED)
FUNCTION BUTTONS
When power off the unit or it is in standby mode, the back-light of display screen will be illuminated
in medium level. When power on the unit, there are six feather touch control buttons, it will be
illuminated on the display screen by pressing the relevant button.
POWER
Press the POWER button to turn the unit on. The cooler will start automatically at medium speed.
After a few seconds the speed will switch to low. To turn the unit off, press the button again.
SPEED
Press the SPEED button repeatedly to change the speed between H - M - L.
TIMER
Press the TIMER button until the desired time duration setting is selected. When the set time
has passed, the unit will automatically turn off (unit remains in Standby mode until power cord is
unplugged from electrical socket). The TIMER function allows you to program the unit for up to 7.5
hours of use.
SWING
Press the SWING button until
The louvers will begin to move left to right automatically.
Vertical Air Flow - You can manually adjust the louvers to change
vertical air flow.
WIND TYPE
Press the Wind type button to select your desired wind type: Random or Sleep
Random: This mode mimic a natural breeze.
Sleep: This mode is for comfort during the night.
MODE
Press the button until
evaporative cooling. The water pump will operate and you will feel the cooler air after the Honeycomb
Cooling Media is completely wet.
WARNING: Please ensure sufficient water is in the water tank otherwise you may hear a Low Water
Alarm and (the low water alarm icon)will be illuminated on the display screen, then the cooler will
start in a Fan only mode without evaporative cooling.
An Ionizer*^ helps to reduce particles in the air, thus promoting cleaner air quality. For models with
the Ionizer*^ feature, pressing the
is illuminated on the display screen. When is not illuminated, the unit will function in a Fan only mode
without evaporative cooling.
is illuminated on the display.
icon is illuminated on the display screen. This activates
button again will activate the Ionizer*^ and you will see
EN
*Applicable for models with this feature only.
^ Ionizer reduces particles in the air. This is not an air purifier.
3
Louver
Movement
icon