User Guide; Safety Instructions - Outdoorchef CITY ELECTRO Montageanleitung

Manual City Electro 2013_Layout 1 21.12.12 09:07 Seite 12
CITY ELECTRO
❻
❶ heating coil
❷ replaceable aluminium protective foil
❸ heat reflector
❹ drip pan
❺ temperature control
❻ main switch
WARNING: Electric Shock
The following nominal values apply to this
appliance:
230 volts – 50/60 Hz
Power rating: 2000 W
12
The appliance must be connected to an earthed mains
socket.
The appliance must be connected via a residual cur-
rent device (RCD) with a maximum nominal trip rating
of 30 mA.
The power cable must be checked for signs of
❶
damage at regular intervals. The appliance must not
be used with a damaged cable.

User Guide

❷
IMPORTANT:
❸
diately write the serial
number of your electric
kettle barbecue on the
back of this user guide.
❹
You will find the num-
ber below the tempera-
ture control and on the
❺
packaging. The serial
number is important for
an unproblematic handling of enquiries, ordering
spare parts and any warranty claims. Keep the
user guide in a safe place. It contains important
information relating to safety, operation and
maintenance.
Please carefully read through these instructions prior
to using your OUTDOORCHEF electric kettle barbe-
cue for the first time. Failure to observe the safety
instructions, warnings and precautionary measures
provided in this user guide may lead to serious or
even fatal injuries or to damage to property as a result
of fire or explosion.

Safety instructions

WARNING:
• Do not use any charcoal or barbecue lighters for this
barbecue. It could cause a dangerous electric shock.
Do not place any combustible materials such as
paper on the barbecue.
• The appliance must only be connected and operated
in accordance with the details on the model rating
plate.
• Do not use the appliance if the power cable, the
mains socket or the appliance show any sign of
damage. Check these every time before the appli-
ance is used.
• Always connect the heating element to the tempera-
ture control before you connect the power cable to
the mains socket. The «UP» symbol on the heating
element must be legible.
Imme-