Maintenance And Cleaning; General Cleaning And Servicing; Sharpening, Turning Or Replacing The Blades; Replacement Parts - Deltafox DG-EKS 2445 Originalbetriebsanleitung

• You now have full access to the
blades (21).
• Remove the blockage.
Maintenance and
cleaning
Leave all work not described
in this manual to an authorised
customer service centre. Only
use original parts.
Wear hand protection when work-
ing on the blade cylinder.
Switch the shredder off, unplug it
form the mains, and wait for the
blade cylinder to come to a com-
plete stop before working on it.
General cleaning and
servicing
Do not spray water onto the
shredder. Electric shock hazard.
• Always keep the shredder, wheels and
air vents clean. Use a brush or cloth to
clean it, avoid cleaners and solvents.
• Always check that the shredder and
especially the guards are not worn
down or damaged but firmly attached
before use. Check that the nuts, bolts
and screws are tight.
• Check the covers and guards for dam-
age and improper attachment. If nec-
essary, change the components
• Keep the shredder in a dry place out
of children's reach. Do not cover the
shredder in nylon bags, as moisture
may develop.
Sharpening, turning or
replacing the blades
Before starting to service or clean
the unit, turn off the unit, pull the
power plug, and wait until the
blade stands still. There is a risk of
injury and a risk to life from electric
shock, fire and rotating blades.
• Check that the power plug (
pulled properly.
• Unlock the housing interlock (10).
• Tip forward the front part of the shred-
der housing.
• Undo the 8 mounting screws (22) on
the cover plate (23) of the shredding
machine. You can now remove these
and place them aside.
• You now have full access to the blade
(21).
• You can use the Allen key (18) to
loosen the screws (20) of the blades
(21) and remove the blades (21).
To assemble the blade you must
use a new screw and tighten it with
an torque of 16 Nm.

Replacement parts

Spare parts and accessories can be
obtained at www.service-deltafox.de
If you have issues ordering, please use
the contact form. If you have any other
questions, contact the service centre (see
"Service-Center").
4 Screw + 2 Blade .....................91105563
GB
7) is
27