EN
30
CONTROL PANEL
1
Timer
2
Light
3
Slider bar
4
Speed
5
Power
KEY FUNCTIONS
Basic functions
•
Insert the plug into the socket. The backlight turns on and goes off after 5
seconds unless you touch a key. The device switches to standby mode. To
activate it again, press any key.
•
Press the POWER key for 2 seconds. The unit moves up and the fan operates
at speed level 1. Press and hold the POWER button again for 2 seconds, the
unit moves down again and the fan stops. When you restart the unit, the fan
continues at the last set speed.
•
Pressing the POWER button while the fume hood is moving up or down will
stop the unit in motion while the fan continues to run. Press the POWER
button again and the unit will continue moving.