Beko RFNE448E45W Bedienungsanleitung Seite 20

Troubleshooting
The freezer or cooler door may be
ajar. >>> Check that the doors are
fully closed.
The product may be set to
temperature too low. >>> Set the
temperature to a h gher degree and
wa t for the product to reach the
adjusted temperature.
The cooler or freezer door washer
may be d rty, worn out, broken or
not properly settled. >>> Clean or
replace the washer. Damaged / torn
door washer w ll cause the product to
run for longer per ods to preserve the
current temperature.
The freezer temperature is very
low, but the cooler temperature is
adequate.
The freezer compartment
temperature s set to a very low
degree. >>> Set the freezer
compartment temperature to a h gher
degree and check aga n.
The cooler temperature is very
low, but the freezer temperature is
adequate.
The cooler compartment temperature
s set to a very low degree. >>>
Set the freezer compartment
temperature to a h gher degree and
check aga n.
The food items kept in cooler
compartment drawers are frozen.
The cooler compartment temperature
s set to a very low degree. >>>
Set the freezer compartment
temperature to a h gher degree and
check aga n.
The temperature in the cooler or the
freezer is too high.
The cooler compartment temperature
s set to a very h gh degree. >>>
Temperature sett ng of the cooler
compartment has an effect on
the temperature n the freezer
compartment. Wa t unt l the
temperature of relevant parts reach
the suff c ent level by chang ng the
temperature of cooler or freezer
compartments.
The doors were opened frequently or
kept open for long per ods. >>> Do
not open the doors too frequently.
The door may be ajar. >>> Fully close
the door.
The product may have been recently
plugged n or a new food tem s
placed ns de. >>> Th s s normal.
The product w ll take longer to reach
the set temperature when recently
plugged n or a new food tem s
placed ns de.
Large quant t es of hot food may have
been recently placed nto the product.
>>> Do not place hot food nto the
product.
Shaking or noise.
The ground s not level or durable.
>>> If the product s shak ng when
moved slowly, adjust the stands to
balance the product. Also make sure
the ground s suff c ently durable to
bear the product.
Any tems placed on the product may
cause no se. >>> Remove any tems
placed on the product.
The product is making noise of liquid
flowing, spraying etc.
The product's operat ng pr nc ples
nvolve l qu d and gas flows. >>> Th s
s normal and not a malfunct on.
20 / 22 EN
Refrigerator/User Manual