Inventum IKI3020 Gebrauchsanleitung Seite 20

• Faulty parts may only be replaced by original parts meet safety
requirements.
• Damage caused by incorrect connection, incorrect fitting, or
incorrect use is not covered by the warranty.
• If the connecting cable is damaged, it may only be replaced
by the manufacturer, the manufacturer's service organisation
or equivalently qualified persons, in order to avoid dangerous
situations.
• The electrical connection must comply with national and local
regulations.
• The wall plug socket and plug should always be accessible.
• The connection cable must hang freely and should not be fed
through a drawer.
• The worktop into which the hob is fitted, should be flat.
• The walls and the worktop surrounding the appliance must be
heat resistant up to at least 90°C. Even though the appliance
itself does not get hot, the heat of a hot pan could discolour or
deform the wall.
Legislation requires that all electrical and electronic
equipment must be collected for reuse and recycling.
Electrical and electronic equipment marked with the symbol
indicating separate collection of such equipment must be
returned to a municipal waste collection point.
20
• English