English - IKEA NYMANE Montageanleitung

English

Charger features
• Wirelessly charges Qi-compatible devices.
• Compatible with Qi 1.2.4BPP specification.
• Temperature and power monitor for safety.
• LED status indicator.
• USB-C outlet compatible with Power Delivery 3.0
standard.
• USB-C to USB-A adaptor included.
Instructions for use
• For wireless charging, place the device to be
charged on top of the plus sign (+) on the charger.
The device must be placed directly over the plus
sign (+) on the charger for the charging function
to work optimally. Note that on some devices you
may have to activate wireless charging in settings.
• If your battery is completely discharged, it may
take a few minutes before it starts charging. This
is entirely normal. You can see that the battery has
begun charging when the battery symbol appears
on your phone.
• When charging only use a recommended USB
cable for your device and replace faulty cables
imminently.
• Be sure to not exceed the maximum USB cable
length recommended for the device.
LED indicator (see illustrations):
1. Power on: LED lights up for 3 seconds.
2. Charging: LED on.
3. Charging completed: LED off.
4. Error: LED flashes.
Good to know
• Devices may get warm during charging; this is
completely normal and they will gradually cool
down again after they are fully charged.
• Charging time may vary based on the device's
battery capacity, charge level, the age of the
battery and the temperature in the surrounding
area.
• USB cable length and quality influences charging
speed and performance.
• Charger storage temperature: -20°C to 25°C.
• Charger operating temperature: 0°C to 40°C.
• Unplug the charger from the mains before
cleaning and when it is not in use.
• To clean the product, wipe with a moist cloth.
Never submerge the charger in water.
Note!
Never use abrasive cleaners or chemical solvents
since this can damage the product.
Recommended precautionary measures and
technical data. See the back of the product..
Save these instructions for future use.
WARNING:
• Only charge devices that are Qi-compatible.
• The wall socket must be located near the
equipment and must be easily accessible.
• Only use in dry locations.
• Children should be supervised to ensure they do
not play with the product.
• Never use a damage or faulty USB cable for
charging, since this can damage the product and
harm your device.
Product servicing
Do not attempt to repair this product yourself, as
opening or removing covers may expose you to
dangerous voltage points or other risks.
RF EXPOSURE INFORMATION
According to RF exposure regulations, under
normal operations the end user shall refrain from
being closer than 10 cm from the device.
4