Reflexion LDDW22i+ Bedienungsanleitung Seite 60

Date
Current Time
Sleep Timer
Auto Standby
EPG
1. Press the EPG button to open or close the EPG menu.
2. You can use the following buttons to operate the EPG menu.
EPG
▲▼◄►
RED button
Yellow button
Blue button
PROGRAM USB RECORDING
1. Insert an empty USB stick or a hard drive into the USB port of the device.
2. Press the MENU button and navigate to Function.
3. Press the OK button and select the PVR option from the menu.
4. Press the OK button to open the menu.
5. Under Recording medium, select the USB storage device on which the recordings are to
be saved.
6. Then go to Format hard disk so that the USB storage device is brought into the correct
format.
Attention:

When formatting, all data will be deleted from the USB memory.
7. The USB storage device is now prepared for recording.
Start recording
Displays the date. Cannot be set manually. Is set via the TV signal.
Displays the time. Cannot be set manually. Is set via the TV signal.
Set a time after which the device should automatically switch to
standby mode. Can also be set using the SLEEP button.
Set the time after which the device should automatically switch
to standby mode if no operation takes place.
Open / close EPG menu.
Navigate in the menu.
Programming a USB recording
Shows the programmed recordings.
Set up a reminder for a program.
60
EN