Operation - VOLTCRAFT DLS-200 Bedienungsanleitung

Operating Instructions
DLS-200 Single-use Temperature Logger
Item No. 2315346
Intended use
This product is a datalogger for monitoring temperature-sensitive products. It has a temperature
range of -30 °C to 70 °C, a resolution of 0.1 °C and can automatically generate PDF reports
for up to 200 days of recording.
For safety and approval purposes, you must not rebuild and/or modify this product. If you
use the product for purposes other than those described, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Temperature logger • Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous if children play with it.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- Is visibly damaged,
- Is no longer working properly,
- Has been stored for extended periods in poor ambient conditions, or
- Has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product.
• Consult an expert when in doubt about the operation, safety, or connection of
the appliance.
• Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Caution:
• To avoid damaging the components, do not attempt to open or repair the PCB
without professional guidance.
• The operating range may be affected by environmental factors and nearby
sources of interference.
• Proper use helps to prolong the lifespan of the product.
b) Connected devices
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
c) LED light
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
d) Batteries
• Correct polarity must be observed while inserting the batteries.
• The batteries should be removed from the device if it is not used for a long
period of time to avoid damage through leaking. Leaking or damaged batteries
may cause acid burns when in contact with skin, therefore always use suitable
protective gloves to handle damaged batteries.
• Batteries must be kept out of reach of children. Do not leave batteries lying
around, as there is a risk that children or pets may swallow them.
• All batteries should be replaced at the same time. Mixing old and new batteries
in the device can lead to (rechargeable) battery leakage and device damage.
• Batteries must not be dismantled, short-circuited or thrown into fire. Never
recharge non-rechargeable batteries. Risk of explosion!
Operating elements
Configuration
Info(Start/
Stop)
Expiry Date
Waterproof
plastic bag

Operation

01 02
1. Press button for 5 Seconds to START
2. Add started DLS-200 to your shlpment
3. Connect stopped Logger directly to USB Port
4. Automated PDF Report with all Details
LED
indicators
Button
(Start/Stop)
USB port
03 04