B.A. International BA Optima Serie Bedienungsanleitung Seite 5

CAUTION
• R ead this Operation Manual before use to fully understand the
product functions and file for future reference.
• W hen operating the product always consider the safety of the
patient.
• U sers are responsible for the operational control, maintenance and
continual inspection of this product.
• D o not attempt to disassemble the product nor tamper with the
mechanism except as recommend by B.A. International in this
Operation Manual.
• D o not allow any impact on to the product. Do not drop the product.
• O perators and all others in the area must wear eye protection and
a mask when operating this handpiece.
• S hould the product function abnormally, cease operation
immediately and contact your Authorized B.A. International Dealer.
• D o not use high acid water or sterilizing solutions to wipe, immerse
or clean the product.
• T he products are delivered in a non-sterile condition and must be
2
autoclaved prior to use.
• P erform regular function and maintenance checks.
• I f the product is not used for a long period check it is functioning
correctly before using on a patient.
• T o avoid clinical downtime it is recommended that a spare be kept
on hand in case of a breakdown during surgery.
3. Setting of Air & Water Supply Pressure
Measure the supply pressure at the handpiece / hose connection point
and set the pressure to the value specified on the specification table.
(Fig.1)
For Multi Gauge information refer to Option Parts List.
WARNING
• D o not exceed the optimum pressure specified on
the specification table.