Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Rear view
Antenna output to connect the antenna
Inputs to connect a maxiumum of 4 transmitters
DC power input jack to connect 12 - 15 V AC/DC adapter
2. Installation
2.1 Installation of the input signal
Use coaxial cables with TNC connectors to connect the outputs of the transmitters to the inputs of the
AD 808 combiner. Make sure that the coaxial cables are as short as possible for optimum operation.
Up to four transmitters can be connected to the antenna combiner.
AD 808
2.2 Antenna installation
For optimal transmission the antenna connected to the combiner should operate in the same
frequency band as the transmitter antenna.
Transmitter
9
Werbung
Inhaltsverzeichnis
