Cleaning And Maintenance - Redmond SkyScales RS-741S-E Bedienungsanleitung

The maximum value of the timer setting — 199:59.
3. After setting the value until the last symbol and pressing the
program will start to count down in 1 second increments. When 00:00 value is
reached an audible signal will be heard.
4. To return to the weighing mode press the
press the button.
5. To disable an audible signal at the end of timer operation press the
Disabling audible signals
To disable audible signals during appliance operation press and hold down the UNIT
button for several seconds. A double audible signal will be heard, after that audible
indication will be disabled. To enable audible signals repress and hold the UNIT button.
When disabling audible signals the notification about the end of the countdown will
be enabled.
III. CLEANING AND MAINTENANCE
Do not use abrasive or solvent-based cleaners, metal sponges, etc. Clean the platform
with a soft damp cloth and wipe dry.
DO NOT immerse the unit in water or wash under running water. The scale is not
dishwasher safe.
It is advised to remove the battery, if the scale is not being in use for a long time. Store
the assembled appliance in a dry, ventilated place away from heating appliances and
direct sunlight.
During transportation and storage, do not expose the device to mechanical stress, that
may lead to damage of the device and/or violation of the package integrity.
Keep the device package away from water and other liquids.
IV. BEFORE CONTACTING SERVICE CENTER
Problem Possible cause
The scale is not turned on
The scale does not
work
The battery is worn out
button the
Weight readings are inac-
curate
button. To return to the timer mode
The unit automatically
button.
turns off
The attempt of synchroni-
zation or transferring the
data from the appliance to
the mobile device failed
V. PRODUCT WARRANTY
Solution
Switch on the appliance by
pressing the button
Replace the battery following
the procedure outlined in "Be-
fore Operating" section
Problem Possible cause
You selected wrong unit of
measurement
You did not follow the recom-
mended weighing procedure
Auto Off feature activated
Bluetooth function on the
mobile device is disabled
Ready for Sky app on the mo-
bile device is deactivate
The Kitchen Scales and mobile
device are far away from each
other or there are strays for
the radio signal
In case you didn't manage to eliminate the defects, please, refer to the authorized
service centre.
NOTE! In case any failure occur in the operation of the Ready for Sky app, it is not ob-
ligatory to apply to the service centre. Apply to REDMOND technical support service and
obtain the consultation of our specialists on error elimination and/or failure in Ready for
Sky operation. Your comments and suggestions concerning application operation will be
taken into account upon successive update. Contact data of user support service of
REDMOND appliances can be found in your country on the website www.redmond.
company. You may also obtain the help, filling the contact form provided on the website.
* The standard warranty is 1 year. An additional year of free service
is provided after the registration in the Ready for Sky app. Informa-
tion about the conditions for your country is available on the
website www.r4s.redmond.company.
1+1 warranty is available for a limited countries list.
SkyScales RS-741S-E
GBR
FRA
Solution
DEU
Select the desired unit of meas-
NLD
urement
ITA
Always place the scale on a flat
and horizontal surface
ESP
The scale automatically turns
PRT
itself off after use in 5 minutes
Enable Bluetooth function on the
DNK
mobile device
NOR
Run the Ready for Sky app on the
SWE
mobile device
FIN
Ensure the distance between
devices does not exceed 15
LTU
metres and there are no strays
LVA
for transmission of radio signal
EST
ROU
HUN
BGR
HRV
SVK
CZE
POL
RUS
GRE
TUR
UKR
KAZ
7