Replacing The Drive Belts - Toro Power Max Heavy Duty 928 OAE Bedienungsanleitung

1. 0.76 mm (0.030 inch)
5. Install the new spark plug, tighten it firmly, and
attach the ignition wire to the spark plug.
Note:
Ensure that the ignition wire snaps
completely into place on the spark plug.

Replacing the Drive Belts

If the auger/impeller drive belt or the traction-drive belt
becomes worn, oil-soaked, or otherwise damaged,
have an Authorized Service Dealer replace the belt.
Figure 38
g001029
23