Printers - Xylem SI Analytics Titroline 7000 Gebrauchsanleitung

If no balance data is available, the «No balance data found» message will appear (Fig. 272).
Fig. 272
9.3

Printers

The results, calibration data and methods can be printed on the following media

HP PCL compatible printer (A4)

Seiko DPU S445 (Thermo paper 112 mm width)

On the USB stick in PDF- and CSV-format
To connect the printers to the burette please use the USB socket.
When printing, please check whether the correct printer is connected. It is not possible to print "HP" printer
layouts on another thermal printer or vice versa. The printer settings should always be checked and adjusted
after changing the printer (Fig. 273).
Fig. 273
Only one printer should be connected for one titrator because automatic printer recognition is not activated.
«Print PDF» is the default setting.
241