Samsung BN68-04471F-01 Kurzanleitung

Components
Smart Touch Control / IR Blaster
Smart Touch Control
Improved user convenience has been provided so that you can switch the channel and adjust the volume with just your fingertips while
focusing on the TV screen. In addition, the built-in Touch Pad removes the need for a mouse when you change the menu settings and
search for something on the Internet.
% For more detailed information about using the Smart Touch Control, refer to Smart Touch Control Guide
Touch Control Guide).
% Voice Control performance levels will vary based on the language spoken.
Installing batteries (Battery size: AA)
2
1
IR Blaster
Connect the IR Blaster to the TV to control the external device with the Smart Touch Control.
If you set the Smart Touch Control to control the external device, the IR Blaster will send the IR Signal to an external device.
Install the IR Blaster within 50 cm and 45 degrees in up, down, left and right from the IR sensor of the external device.
Installing batteries (Battery size : AA)
1
2
1
Power Switch
BN68-04471F-01
All manuals and user guides at all-guides.com
SMART TV
QUICK SETUP GUIDE
• Smart Touch Control
Press the back of the remote at the very bottom with both thumbs, and then
1
slide the battery cover up in the direction of the arrow.
Install two batteries so that the polarity of the batteries (+/-) matches the
2
illustration in the battery compartment.
Slide the cover down in the direction of the arrow to close the battery cover.
3
Pairing Button
OPEN
1
2
1
English - 1
TV STB BD
RETURN VOICE NUMBER
• IR Blaster
(‹
Hold the both sides of the battery holder and pull it out.
1
Install four batteries so that the polarity of the batteries (+/-)
2
matches the illustration in the battery compartment.
Push it back.
3
Device Indicator LED
IR Blaster shows the pairing
state.
→ →
Support Smart