Reill Water - Philips HU4801 Benutzerhandbuch

Reill water

Water level can be observed through the
transparent water tank window.
1
Switch off the humidiier and unplug it.
2
Remove the upper unit by holding it at
both sides.
3
You can observe the water level through
the transparent water tank window. Fill
the water tank with cold tap water until
the water reaches the maximum water
indication level.
MAX
10
EN
All manuals and user guides at all-guides.com
Note
When illing water, do not exceed the maximum water
•
level, or water might leak from the drain hole and air inlets.
Do not shake the water tank when moving it, or water
•
might leak from the drain hole and air inlets.
Do not ill water through the air outlets on top of the
•
humidiier.
4
Place the upper unit back onto the water tank.