Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CAUTION: Avoid potential personal injury or property damage!
● Mount the wall plate assembly
directly onto the concrete surface.
● Minimum solid concrete thickness: 8 in. (203 mm).
1. Position the wall plate
on the wall at your desired height. Level the wall plate and mark the hole
locations.
2. Drill three pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.36 in. (60 mm).
UP
3/8"
(10mm)
Wall plate
2.36"(60mm)
12
Werbung
