Optional Accessories - Makita HM1802 Bedienungsanleitung

OPERATION
Chipping/Scaling/Demolition
CAUTION:
• Keep well-balanced posture when holding the heavy tool
before / during / after operation to avoid personal injuries.
• Secure debris in case of breaking it into smaller pieces.
• Hold the tool firmly with both hands. Turn the tool
on and apply slight pressure on the tool so that the
tool will not bounce around, uncontrolled. Pressing
very hard on the tool will not increase the efficiency.
• Do not pull out the tool if stuck. Instead, break
the work around the bit tip.
• Be sure to place the tool on the stable floor or
ground after use.
► Fig.8
Always use the soft grip (auxiliary handle) and firmly hold the
tool by both side grip and switch handle during operations.
MAINTENANCE
CAUTION:
• Store the machine in horizontal position to avoid
possible grease leakage.
•
Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
To maintain product safety and reliability, repairs, any mainte-
nance or adjustment should be performed by Makita Authorized
Service Centers, always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specified in this
manual. The use of any other accessories or attach-
ments might present a risk of injury to persons. Only
use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Bull point
• Cold chisel
• Scaling chisel
• Clay spade
• Rammer
• Safety goggles
• Hammer / bit grease
• Dust extractor attachment
NOTE:
• Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
5 ENGLISH