Set Timed Program For Outdoor Unit - AERMEC VMF E6 Bedienungsanleitung

Set timed program for outdoor unit

In the timed program setting window for the outdoor units, you can make
the following settings:
A
The daily profile: the timed program for the outdoor units is weekly,
which means a different profile can be set for each day of the week (check
the label at the top right of the screen
are setting). Each daily program is sub-divided into 24 bands (one for every
hour) in which you can define the required outdoor unit status by clicking on
the key for the relative hour. Each press on this key changes the status of the
time band portion, as explained below:
Outdoor units
DISABLED
By pressing the key on the lower part of the screen, you can copy the time set-
tings of the current day in ALL the days of the week (a drop-down window will appear,
asking for confirmation of the operation).
To select a different day of the week, press the
screen.
To return to the previous page, press the
tomatically if 5 minutes elapse with no interventions.
TIMED PROGRAM FOR HEAT PUMP
0 1 2 3
A
12 13 14 15 16 17 18 19 20 21 22 23
26
B
to see which day of the week you
Outdoor units
ENABLED
key on the lower part of the
key. The homepage will be restored au-
B
Mon
4 5 6 7 8 9 10 11