Safety Instructions - PowerWalker VFI ICT IoT Benutzerhandbuch

SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS. This manual contains important instructions that should be
followed during installation and maintenance of the UPS and batteries.
UPS Tower models are considered acceptable for use in the ambient of 0 ~ 45°C;
UPS RT models are considered acceptable for use in the ambient of 0 ~ 40°C;
Certification standards
Safety: IEC/EN 62040-1
•
EMC: IEC/EN 62040-2
•
Performance: IEC/EN 62040-3.
•
ISO 9001:2015.
•
ISO 14001:2015.
•
Special symbols
RISK OF ELECTRIC SHOCK - Observe the warning associated with the risk of electric
shock symbol.
Important instructions that must always be followed.
EU separate collection and lead content mark for lead acid batteries. Indicates that
the battery must not be disposed of to the 'normal' household waste but be
separately collected and recycled.
EU separate collection mark for waste electrical and electronic equipment (WEEE).
Indicates that the item must not be disposed of to the 'normal' household waste
but be separately collected and recycled.
Information, advice, help.
Refer to the user manual.
Safety of persons
Dangerous voltage levels are present within the system. It should be opened exclusively

by qualified service personnel.
The system must be properly grounded.

The battery supplied with the system contains small amounts of toxic materials. To avoid

accidents, the directives listed below must be observed:
- Servicing of batteries should be performed or supervised by personnel