Matrix Configuration; Sw164Osm Standard Matrix Setup; Sequence Cycles - Videotec DCS2 Bedienungsanleitung

Matrix configuration

The DCS2 keyboard allows to control the two versions of the SW164OSM matrix: Standard and OSM.
As far as the Standard matrix is concerned, the programming is limited to the basic parameters displayed on the
keyboard; on the contrary, the whole programming phase of the OSM matrix is carried out by means of the video and is
displayed on the monitor number 1.

SW164OSM Standard matrix Setup

Matrix standard setup defines:
• automatic switching sequences
• Identification texts ( ID texts )
• time and date parameters.
To begin SW164OSM Standard setup procedure
Description
P
Press to enter in programming mode;
type setup password, if required.

Sequence cycles

SW164OSM video matrix switches on different sequences during day and night periods. Each monitor has its own
sequences ("day" sequence and "night" sequence): a sequence is defined as a set of a maximum of 16 steps,
identifying an input to be shown (1 to 16), and a dwell time (from 0 to 99 seconds). In each sequence, the same input
can be repeated without limitations.
Sequence definition
Description
U D
to select Sequences menu
Press and
E
Press to get into the menu
Select the sequence by using
the choice.
1
Type to delete the old sequence and introduce the
0
new one, or type
The first row indicates the sequence (Day sequence of
operator no.1, in the example); the second row indicates
the input to be displayed and the duration of the display.
[A] is the step to be modified (the 16 steps are indicated
with the letters: from [A], the first, to [P], the last);
select the steps to be modified by pressing
Request the modification of current step by pressing
Type in the input number, and press
Type in dwell time and press
Description (continuation)
U D
and , and confirm
to modify the old one.
U
E
to confirm.
E
to confirm.
Keys
P
Keys
U D
E
U D
[ ]
1 0
/
U D
[ ]
D
/ .
E
1 2 E
3E
Keys
Page 21
Display
-CONFIGURATION-
Display
MATRIX SETUP
1.Sequences
SEQUENCES
User #1,Day £
Erase old setup?
E
[1] Yes [0] No
User #1, Day seq.
[A] In:05 Sec.02
User #1, Day seq.
E
[C] In:__ Sec.02
User #1, Day seq
[C] In:12 Sec.__
User #1, Day seq
[C] In:12 Sec.03
Display
SETUP
£
1.
DCS29702