Herunterladen Inhalt Inhalt Diese Seite drucken

More About This Receiver; Basic Disc Operations; Tuner Operations - JVC KD-SHX701 Bedienungsanleitung

Cd-receiver
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

More about This Receiver

○ ○ ○ ○ ○ ○ ○ ○ ○
Basic Operations
Turning off the power
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
○ ○ ○ ○ ○ ○ ○ ○ ○

Tuner Operations

Storing stations in memory
• When SSM is carried out for a band...
– All stations previously stored for the band
are erased and stations are stored newly.
– Received stations are preset in No.1 (lowest
frequency) to No.6 (highest frequency).
When SSM is over, the station stored in
No.1 will be automatically tuned in.
• When storing a station manually, a previously
preset station is erased when a new station is
stored in the same preset number.
• Preset stations are erased when the power
supply to the memory circuit is interrupted
(for example, during battery replacement). If
this occurs, preset the stations again.
FM RDS operations
• Network-Tracking Reception requires two
types of RDS signals—PI (Programme
Identification) and AF (Alternative
Frequency) to work correctly. Without
receiving these data correctly, Network-
Tracking Reception will not operate.
• If Alternative Reception (for DAB: see page
56) is activated, Network-Tracking Reception
is also activated ("AF") automatically. On the
other hand, Network-Tracking Reception
cannot be deactivated without deactivating
Alternative Reception.
• TA Standby Reception and PTY Standby
Reception will be temporarily canceled while
listening to an AM station.
○ ○ ○ ○ ○ ○ ○ ○ ○

Basic Disc Operations

General
• This unit has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/
CD-RWs (Rewritable) in both audio and
MP3/WMA formats.
• The unit cannot read or play an MP3 track
without the extension code <mp3>, and a
WMA track without the extension code
<wma>.
• When a disc has been already loaded,
selecting "CD" for the playback source starts
disc play.
Inserting a disc
• When a disc is inserted upside down, the disc
automatically ejects.
• If you keep the control panel open for about 1
minute, the control panel returns to its
previous position.
Playing a disc
• While playing an audio CD: If a title has been
assigned to the audio CD (see page 42), it
will be shown on the display.
• While fast-forwarding or reversing on an
MP3 or WMA disc, you can only hear
intermittent sounds. (The elapsed playing
time also changes intermittently on the
display.)
59

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis