Basic Operations; Turning On The Power; To Drop The Volume In A Moment - JVC KD-SH909R Bedienungsanleitung

BASIC OPERATIONS

Turning on the power

1
Turn on the power and select the
source.
AM TUNER (AM)
DAB TUNER (DAB)*
CD CHANGER (CDCH)*
LINE INPUT (LINE)***
AUX INPUT (AUX)***
* Without connecting the DAB tuner or CD
changer, you cannot select it as the source to
play.
** If a disc is not in the loading slot, you cannot
select CD as the source to play.
*** When "LINE IN" or "AUX IN" is set to
"OFF," you cannot select it as the source to
play. (See page 39).
To operate the tuner (FM or AM—MW/LW),
see pages 10 – 20.
To play a CD,
see pages 21 – 24.
To play an MP3 disc (only for KD-SH909R),
see pages 27 – 32.
To operate external components – AUX INPUT
(AUX) and LINE INPUT (LINE),
see pages 44 and 45.
To operate the CD changer,
see pages 46 – 48.
To operate the DAB tuner,
see pages 49 – 52.
8
When you press the button
for the first time, the power
comes on. Then each time
you press the button, the
source changes as follows:
FM TUNER (FM)
CD**
Back to the beginning
Note:
When you use this unit for
the first time, set the built-in
clock correctly, see page 9.
2
Adjust the volume.
Volume level indicator
Note:
After adjusting the volume, you can push in the
control dial to avoid unintended operations.
To use it again, push the control dial again to
make it come out.
3
Adjust the sound as you want.
(See pages 33 – 35.)
• You can adjust and store the input level of
each source except for FM (see page 33).

To drop the volume in a moment

Press and hold ATT while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press and
hold the button again.
• If you turn the control dial clockwise, you can
also restore the sound.
To increase the volume.
To decrease the volume.
Volume level appears.