JVC KD-SX1500R Bedienungsanleitung Seite 25

When this function is turned on (the CRUISE indicator lights up on the display), the proper
volume level is automatically selected among the 3 possible levels according to the driving
speed, and the selected level is shown on the display.
To adjust the volume increase rate
If you find Audio Cruise increases (or decreases) the volume either too much or too little as
the driving speed changes. You can adjust the increase rate by changing the boost level.
To change it, follow the procedure below.
1 Press and hold SEL (Select) for more than 2 seconds so that "PSM" appears on the display.
¢ or 4
2 Press
display.
The current setting for this function also appears.
3 Rotate the control dial to select either "Cruise 1" or "Cruise 2."
¢ twice (or 4
4 Press
appears on the lower part of the display.
5 Rotate the control dial to select the boost level (among 01 to 15) you want while the current
boost level is shown on the display.
6 Press SEL to finish the setting.
If Audio Cruise does not function correctly
You may need to store the idling speed into memory to make Audio Cruise function correctly.
NOTICE that a number of factors, such as electric power steering, wipers, power windows, air
conditioner, etc. do generate noises and, as a result, may cause Audio Cruise not to function correctly.
If this is the main cause of malfunction, connect the memory backup lead (yellow lead) directly to the
car battery to prevent these noises from affecting Audio Cruise.
1 Start the engine and let it warm up.
2 Press and hold SEL (Select) for more than 2 seconds so that "PSM" appears on the display.
¢ or 4
3 Press
display.
The current setting for this function also appears.
4 Rotate the control dial to select either "Cruise 1" or "Cruise 2."
¢ once (or 4
5 Press
part of the display.
6 Rotate the control dial to select the idling speed you want.
"Memory" flashes for a while.
• If "No Input" flashes on the lower part of the display, check to see if the connection is
correct.
7 Press SEL to finish the setting.
When the setting is complete, the unit automatically checks to see if Audio Cruise functions
correctly with this new idling setting. If it does not function correctly, Audio Cruise is canceled
automatically and the idling setting becomes invalid.
• If this happens, see the NOTICE above.
When the driving speed increases.
When the driving speed decreases.
repeatedly until "Cruise Mode" appears, if not shown on the
repeatedly) so that "Boost" (with its current setting level)
repeatedly until "Cruise Mode" appears, if not shown on the
repeatedly) so that "+ OR – RPM Set" appears on the lower
25