Starting Up The Device - Spypoint LINK-S-DARK Bedienungsanleitung

CHOOSING A PHOTO TRANSMISSION PLAN FOR YOUR CAMERA
Go to www.spypoint.com/en/spypoint-experience/plans
to read the latest offers and choose the plan that suits you.

STARTING UP THE DEVICE

You can configure your camera settings in 3 ways:
1. Directly from the camera screen. After turning it on,
choose "configuration" from the main menu.
2. Through the SPYPOINT application, in the "Settings"
section.
3. By the SPYPOINT web app. You will first need to create an
account and then log in. Use the "Settings" section.
Both the SPYPOINT app and website allow you to remotely
configure all of your camera's parameters and to obtain the
status of its main elements, including cellular signal strength,
battery power level and space used on the SD card.
Your new settings will be applied the next time your camera
communicates with the serve via the cellular network.
Note that during the 15 minutes after starting up your camera,
it will communicate with the server each time it takes a
photo and it will also apply the settings you previously chose.
Afterwards, the camera will communicate according to the
default settings (transfer frequency/first transfer time) or
those you chose. You will find below the basic settings you can
configure.
10