Maximum Load - Nibe RPP 10 Installateurhandbuch

General
RPP 10 is a wireless outlet that amplifies the signal
between zones and improves the communication
between your smart home products, if they are located
a long way from the main product. RPP 10 has a built-
in energy meter and continuously reports the energy
consumption to your main product.
NOTE
If RPP 10 loses contact with the main product,
RPP 10 will try to reconnect for 60 minutes, if
the reconnection fails, the power supply to the
output socket in RPP 10 will be turned off.
Therefore, do not connect equipment that is
sensitive to power outages.

MAXIMUM LOAD

You can connect a maximum of 2 990W/13A to RPP 10.
FUNCTIONS
Caution
RPP 10 requires the main product to have
software version 2.0 or later. The "Scheduling"
function requires software version 2.1.
MANUAL CONTROL
There is a built-in function that allows you to control
RPP 10 by remote control. Using the remote control
function, you can turn the power outlet in RPP 10 on
and off manually via the app on your smartphone and
on myuplink.com. Alternatively, you can turn the power
outlet on and off using the physical button on RPP 10.
ENERGY METER
The energy consumption for products connected via the
power outlet in RPP 10 is measured and reported. The
measured value can be presented in two ways:
• Current consumption (W)
• Total consumption (kWh)
SCHEDULING
RPP 10 can be controlled via your main product's
scheduling. In the main product, you follow a guide for
scheduling the power outlet in RPP 10 to control the
times at which the current is to be turned on and off.
COMPATIBLE PRODUCTS
• S1155/S1255
• SMO S40
10
• VVM S320
• VVM S325
CONTENTS
1 x RPP 10
1 x Quick guide
RPP 10 | GB