Top Handle Customization; Front Panel Customization - AEG AX5 Serie Anleitung

CUSTOMIZING – picture pages 6-7
The AX7 / AX5 series Air Purifier was designed with a unique form and aesthetic sense
to ensure it fits in with your home and its furnishings, unlike other appliances. In
addition, the series comes with many customization kits for the unit that add to the
aesthetics but also functionality of the unit.

TOP HANDLE CUSTOMIZATION

The polyurethane leather (PU) handle at the top of the unit is attached to the unit by
way of two screws. Follow the steps below to attach or replace an existing top
handle.
37. If you are replacing an existing top PU handle:
a. Remove the two screws, twisting counterclockwise and set aside along
with existing handle.
b. Remove any protective plastic packaging from the new handle and fit it
onto the unit by tightening the screws, twisting clockwise, till you meet
some resistance. Ensure a snug fit with no gap in between the unit and
the screw.
c. Test out the handle by lifting the unit 5-6 cm above the ground with it
and giving it a gentle shake.
38. If you are adding a top handle for the first time:
a. At the top of the unit, in between the product UI & the air outlet grill you
will find two circular cavities secured with a rubber plug. Uncover the
cavity by removing these rubber plugs from the unit by gently pulling on
the sides of the plug.
b. Follow the steps 37b. and 37c (above).

FRONT PANEL CUSTOMIZATION

The look of the front panel can be customized with a fabric cover to help accentuate
it but also to ensure the unit blends well with the decor of the room. The fabric cover
has an elastic seam that helps secure it to the front panel, hence no screws or staples
are necessary for its installation.
39. Please detach the front panel from the unit and if it already has a removable
fabric cover please gently take it off the panel – ensuring not to bend the panel.
NOTE: Models in the AX7 series come with a fabric permanently attached to the front panel, this fabric is not
removable from the panel, but you can still customize the panel with another fabric cover on top of the existing fabric.
15 www.aeg.com