Usb Connection - Dostmann Electronic LOG200-Serie Bedienungsanleitung

5.3.2 Display used memory (%), date and time
5.4 Stop recording / create PDF
Connect logger to an USB port. Beeper
sounds for 1 second. LED blinks green until
result PDF is created (can take up to 40
seconds).
The symbol ► disappears in the status line.
Now the logger is stopped.
The Logger is shown as removable drive
LOG200/LOG210/ LOG220
View PDF and save. PDF will be overwritten
with next log start!
Note: With the next recording the Extrema (Max- and Min-value),
and the AVG-value will be reset.
5.4.1 Stop recording by button.
To stop the Logger via button it is necessary to change the
configuration by Software LogConnect. If this setting is done the
start button is also the stopp button.
24
After pressing shortly the start
button while the logger is recording,
in the first line shows (line 1) MEM
appears and in the second line (line
2) displays the used memory will be
display in percentage(%). Afterwards
the logger displays date and time for
2 seconds.
5.5 Description of PDF result file (see Fig. C)
Filename: z.B.
LOG220_16099908_2016-09-27T103123.PDF
A LOG220: Device
16099908: Serial
2016-09-27: Start of recording (date)
T103123: time: HHMMSS
Description: Log run info, edit with LogConnect* software
B
Configuration: preset parameters
C
D Summary: Overview of measurement results
E Graphics: Diagram of measured values
F
MOV: Indicates whether instrument has been
moved (with date and time)
Signature: Sign PDF if required.
G
: Measurement OK
H
5.6 USB-Connection
For configuration the instrument has to be connected to the
USB-port of your Computer. For configuration please read the
according to chapter and the use the online-direct help of the
Software LogConnect.
X
: Measurement failed
25