For Using Water Dispenser; Icematic - Beko GN1426234ZDXN Bedienungsanleitung

Operating the product

5.19 For using water dispenser

Before using your fridge first time and
after replacing your water filter, water
dispenser may drip drops of water. To
prevent water dripping or leaking from
dispenser, please bleed the air from
the system by dispensing 5-6 gallons
(about 20 liter) of water through the
A
water dispenser before the first use
and every time after you change
the water filter. This will remove any
air trapped in the system and stop
the water dispenser from leaking.
Checking coupler position and the
straightness of water line at the back
of the unit will be required if there's an
obstruction in water flow.
C
If your water dispenser is leaking just a few
drops of water after you have dispensed some
water, this is normal.

5.20 Icematic

(in some models)
To get ice from the icematic, fill the water tank
in the fridge compartment with water up to the
maximum level.
Ice cubes in the ice drawer may stick to each
other and become a bulk due to hot and humid
air in approximately 15 days. This is normal. If you
cannot break the bulk apart, you can empty the ice
container and make ice again.
C
It is recommended to change the water
in the water tank if it remains in the
water tank for more then 2-3 weeks.
C
Strange noises you hear from the refrig-
erator at 120-minute intervals are the
sounds of ice-making and pouring. This
is normal.
C
If you do not want to make ice, press the Ice
off icon to stop the icematic to save energy
and prolong the service life of your refrigerator.
C
It is normal that a few drops of water drop
from the dispenser after you have taken water.
28 / 30 EN
Refrigerator / User Manual