Installing The Charger; Installing The Handset - MT Logic BUTLER E465 TWIN Gebrauchsanweisung

2.3 Installing the charger

1 Plug the adaptor into the wall outlet.

2.4 Installing the handset

1 Open the battery compartment as shown on picture 2C.
2 Insert the batteries respecting the polarity (+ and -).
3 Close the battery compartment.
4 Leave the handset on the base unit for 20 hours.
- 2C Back view of handset -
A. Cover
B. Rechargeable batteries
Before you use the telephone for the first time, you must first make sure the battery
is charged for 20 hours. If you do not do this, the telephone will not work optimally.
A
- 2B Back view of charger -
A. Adaptor with power cable
Getting started
A
B
5