Radio Mode; Start Radio Mode; Select Memory Bank; Tuning Into A Station - Blaupunkt 700 DAB Serie Bedienungsanleitung

Radio mode

Start radio mode

In the main menu, press the [ Radio ] button.
The radio playback menu is displayed.

Select memory bank

Different memory banks and wavebands are available.
Up to 30 FM and 20 AM stations can be stored in each
memory bank.
Press the [ FM/AM ] button to switch to FM or AM
band.

Tuning into a station

Tuning into stations manually
Briefly press the [
seek tuning
The radio tunes into the next receivable station.
Enter broadcast frequency directly
If the frequency of the desired stations is known, it can
be entered directly via the touchscreen.
Press the [ ] button to display additional
operating options.
Press the [ ] button.
A numeric keypad is displayed for the frequency
input.
Enter the frequency of the desired station with the
numeric keypad.
Press the [ OK ] button.
26
] or [ ] button to start station
The radio playback menu is displayed, the station of
the frequency entered is played back.
Starting station seek tuning
Press the [ ] or [
once or several times to change the frequency in
increments..
Note:
For the reception area Europe: In the FM waveband,
only traffic information stations are tuned into if the
priority for traffic information is switched on.

Storing stations in Presets

You can store up to 30 FM and 20 AM stations in the
Presets list manually.
Select the desired memory bank with the [ FM/AM ]
button.
Set the desired station.
Press the [ ] button if necessary.
Press one of the memory buttons for approx. 2
seconds to store the current station at the button.
The station is stored.
- Or -
Press the [ ] button to show the Preset list, and
select an option to store it.
Press the [ ] button again to cancel it .
You can also press [
the Presets list.

Storing stations automatically (Discovery)

With Discovery, you can automatically search and store
the 30 FM and 20 AM stations offering the strongest
reception in the region in the current memory bank.
Any previously stored stations in this memory bank are
deleted in the process.
Select a memory band.
Press the [ ] button.
The tuner starts the automatic station seek tuning.
After the storing is completed, the radio plays the
station at memory location 1 of the previously
selected memory band.
Note:
For the Europe reception area: If traffic information
is switched-on, only traffic informations are stored.
Press the [ ] button to view the stored stations.

Adjusting the seek tuning sensitivity

The seek tuning sensitivity decides whether the auto-
matic station seek tuning finds only strong stations or
also weaker stations that may be noisy.
Press the [ ] button to display additional
operationg options.
Press the [ ] button.
Radio mode
] button for approx. 2 seconds
] and [ ] button to access
7