Dimplex PLX 050E Montage- Und Gebrauchanweisung Seite 13

PLX 050E - PLX 300E
1. Notes for the user
NOTE NOTE
Dear customer,
Keep these instructions in a safe place and pass them
on to possible future owners.
CAUTION!
This device can be used by children aged 8
and over and by persons with limited physical,
sensory or mental aptitude or lack of experi-
ence and/or knowledge, providing they are
supervised or have been instructed in the safe
use of the device and understand the associ-
ated potential dangers. Children must not play
with the device. Cleaning and user mainte-
nance may not be carried out by children with-
out supervision!
CAUTION!
Children younger than 3 years of age must be
kept away unless they are supervised con-
stantly. Children between the ages of 3 and 8
may switch the device on and off if they are
supervised or have been instructed in the safe
use of the device and have understood the re-
sulting dangers, providing that the device is
positioned or installed in its normal place of
use!
CAUTION!
Children between the ages of 3 and 8 may not
switch on the device, clean the device or carry
out maintenance!
CAUTION!
The device carries the symbol
shown on the right, which indicates
that the heating device must under
no circumstances be covered with
any objects.
CAUTION!
Some parts of the device can get very hot and
cause burns. Particular caution must be taken
with children or vulnerable people!
CAUTION!
Do not operate the heating device in rooms
where highly inflammable substances are
used (e.g. solvents).
www.dimplex.de/en
All manuals and user guides at all-guides.com
Install the device in such a manner that it can-
not be touched by a person in the bathtub or
under the shower.
If the power cable is damaged, it must be re-
placed by the manufacturer or after-sales ser-
vice representative or a person with compara-
ble qualifications for switching off danger
sources!
Use device for room heating within enclosed rooms only.
2. Assembly, installation, minimum clearance
Do not install the device directly below a wall
socket.
The minimum clearances must be observed.
In addition, a clearance of 500 mm is to be maintained
in front of the unit.
The heating device must be aligned horizontally and
installed on a vertical wall (see illustration).
All dimensions in mm.
During assembly, the safety area must be complied
with according to the current installation regulations.
The socket or supply connection socket must be
accessible after installation.
Make sure that the inflow and outflow of air at the top
and bottom of the device are unimpeded
1810/C
CAUTION!
CAUTION!
NOTE NOTE
CAUTION!
Model Drilling dimension A
PLX 050E 128 mm
PLX 075E, PLX 100E 298 mm
PLX 150E 368 mm
PLX 200E, PLX 300E 538 mm
English
.
EN-2