Fitting The Briefcase Extension - Konig + Neurath TALO.S Bedienungs- Und Montageanleitung

Fitting the briefcase extension

(a) Remove the end caps from the frame console (not illustrated).
Slide the briefcase extension support into the frame console.
(b) Screw them together from the side (SW 5).
(c) Position top 1 to the consoles, fit them together from under-
neath, tighten screws slightly (not illustrated).
Fine adjustment can be carried out using grub screws 2
(SW 4). Adjust the inclination with grub screw 3 (SW 3).
After adjustment, fasten screws tightly.
(d) Fit an additionally reinforcing tube (from type 1600).
(a)
(d)
(c)
1
36
(b)
(a)
2
3