Handling and operation
Fitting the suction cup
Ensure that the surface to which you wish to attach the suction
cup is clean, dry and free of grease . Make sure that the
suction cup locking lever
♦
Press the suction cup
push the suction cup locking lever
suction, and the suction cup
windscreen .
♦
Release the locking lever
the car cradle . Then press the locking lever
♦
Release the locking lever
360° in both the horizontal and vertical directions . Then
press the locking lever
♦
To remove the suction cup
the suction cup locking lever
tab at the edge of the suction cup .
Mobile phone charging
♦
Connect the car/USB adapter
socket (cigarette lighter) of your vehicle .
The white LED in the housing indicates that the car/USB
adapter
cle type, it is possible that the ignition has to be switched
on first . The car/USB adapter
conjunction with the car cradle .
♦
Connect the USB type A plug of the connection cable
to the car/USB adapter
│
GB │ IE │ NI
■
10
firmly against the windscreen and
is ready for operation . Depending on the vehi-
is not engaged .
upwards . This creates
is pulled tight against the
to adjust the inclination of
to rotate the car cradle through
upwards .
from the windshield, push
downwards and lift the
to the 12/24 V on-board
may only be used in
.
upwards .
SILH 4 A1