Setting Fanspeed; Factory Reset - Jaga MINI FREESTANDING HYBRID Installations- Und Gebrauchsanleitung

6.2. SETTING FANSPEED
1. Select the mode that you want to adjust: Cooling
2. Select the speed that you want to adjust:
3. Hold down [Mode] and [-] simultaneously until the first 4 LED's are flashing.
4. Short press [-] or [+] to adjust the preset speed.
50%
55%
60%
65%
70%
75%
80%
85%
Default factory setting of the fan speed is selected depending on the device's length in order to guarantee the sound levels..
5. The device returns to the selected mode. (±30sec).
6.3. FACTORY RESET
1. Disable power charge.
2. Press and hold down both the [-] and [+] button on the circuit board
and switch on the power again. The
by the green LED 2 seconds later and the
Release the buttons as soon as all 3 LEDs are
3. The controller will return to the Factory Default settings, all LEDs will flash for 8 seconds.
JAGA N.V. | MINI FREESTANDING HYBRID | MANUEL | 2021.03.25 | V.01
MODE
15 sec
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
blue LED will light up, followed
red LED
flashing.
/ breeze / Heating
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE
MODE
MODE MODE
MODE MODE
4 seconds later.
90%
95%
100%
105%
EN
110%
115%
120%
- +
-
33