Memory Pad Heating For Double/Triple Quantity Heating; 10S/+20S Pad Heating - Panasonic NE-2153-2 Bedienungsanleitung

How to Operate NE-2153-2/NE-1653
G. Memory Pad Heating for Double/Triple Quantity Heating
[Make sure the unit is properly programmed. (See page 19.)]
H. +10s/+20s Pad Heating
(Continued on next page.)
1. Follow Steps 1–3 in "E. Memory Pad Heating".
2. Touch Double/Triple Quantity Pad once.
Note: When you want triple quantity heating, touch Double/Triple Quantity Pad twice.
3. Touch the desired Memory Pad.
[Example]: Memory Pad 5 (Program No. A-5)
4. Touch Start Pad.
A. The oven lamp will turn on.
B. During operation, the indicator appears in order from the left.
C. The heating time will count down.
Note: If program lock is activated, the heating program starts immediately,
i.e. there is no need to touch Start Pad. (See page 21.)
5. When all time has expired, the end of the cycle beep tone will sound. All heating will
stop. The oven lamp will turn off. The time display will blink "0000" until the door is
opened.
6. Open the door and remove the food. Close the door.
1 minute later the Digital Display Window will go blank.
Note: To use B or C side Program, touch Shift (A/B/C) Pad before touching Program
Number Pad.
1. Make sure the oven is plugged into a properly earthed electrical outlet.
2. Open the door.
The oven lamp will turn on. "0" will appear in the Digital Display Window.
Note: While "0" will appear, operation is available. 1 minute after the door is closed,
"0" will disappear.
3. Put the food into a suitable container, place it in the centre of the oven and then close
the door securely.
The oven lamp will turn off.
4. Touch +10s/+20s Pad once.
A. The oven lamp will turn on.
B. During operation, the indicator appears in order from the left.
C. Heating will start on HIGH power for 10 seconds.
[Example]: Touch +10s/+20s Pad once for 10 seconds.
Touch +10s/+20s Pad twice for 20 seconds.
5. When all the time expires, the end of cycle beep tone will sound. All heating will stop.
The oven lamp will turn off. The time display will blink "0000" until the door is opened.
1 minute later, cooling fan will stop.
- 20 -