ACTION
1 Open Door.
2 Press
PROG Pad.
Two Touch Operating Mode
•
The oven reverts to 2 TOUCH OPERATION mode when you deactivate Programme Lock.
Press required key NUMBER Pads then press START Pad.
Interrupted Programme
•
If the door is opened during a programme, once programme lock is deactivated, the remaining heating
time will be retained in the display window until the door is closed and START Pad is pressed.
Repeat Feature
•
Once a manual heating programme has finished, the oven will automatically display the programme
again for a repeat programme with the Programme Lock deactivated.
Setting New Programs
•
Once Programme Lock is released, you can enter new heating programs.
It is possible to check the programmes that have been entered into the SD Memory Card. With
the door open, press START pad and NUMBER pad 1 simultaneously. (The Oven will make an
acknowledging beep). After 2 seconds, the display window will show each individual stage of
each Memory Programme in the order 01, 02, 03 etc. Finally, it will display the Beep Tone
setting and the Programme Lock symbol (P.L), the time interval for cleaning of the Air Filter,
before clearing to "0".
How to Deactivate Programme Lock
The oven light will come on.
Keep key pressed for 2 seconds until "P" is
displayed.
KEEP DOOR OPEN.
After 2 seconds....
After 3 seconds...
Programme List
INFORMATION
- 28 -
DISPLAY