General Information - Dantherm CDP 35T Montageanleitung

General information

Introduction This topic gives the general information about this service manual and about the unit.
Manual, part no. Part number of this service manual is 975676.
Target group The target group for this service manual are the technicians who install and maintain
the CDP 35T/45T/65T unit.
Copyright Copying of this service manual, or part of it, is forbidden without prior written permission
from Dantherm Air Handling.
Reservations Dantherm Air Handling reserves the right to make changes and improvements to the
product and the service manual at any time without prior notice or obligation.
EC-Declaration of Dantherm Air Handling A/S, Marienlystvej 65, DK-7800 Skive hereby declare that the
Conformity units mentioned below:
are in conformity with the following directives:
- and are manufactured in conformity with the following standards:
Skive, 16.08.2001
Recycling The unit is designed to last for many years. When the time comes for the unit to be
recycled, it should be recycled according to national rules and procedures to protect the
environment.
The CDT dehumidifiers contain R407C refrigerant and compressor oil. The compressor
must in connection with disposal be returned to authorities.
Dehumidifiers, type CDP 35T/45T/65T:
98/37/EEC Directive on the safety of machines
73/23/EEC Lov Voltage Directive
89/336/EEC EMC Directive
EN 60335-2-40 Standard for electric dehumidifiers
EN 292 Machine Safety
EN 50081-1-EMC Generic Standard for Emission
EN 50082-1 EMC Generic Standard for Immunity
19