How To Operate - Panasonic NE-1037 Bedienungsanleitung

This oven is preset at the factory for the following
1. Memory Pads preset to 1000 W at the indicated heating times for single stage heating.
Pad No. 1
Time 10 sec.
The Double Quantity (x 2) Pad preset to automatically double the programmed time of each Memory Pad.
(See pages 15, 18)
2. Program Unlock. (See page 19)
3. Cycle counter set to "0". (See page 21)
Display
The display will flash "0".
• continuously if door is not
opened to remove the food.
NE-1037_EYG.indb 12

How to Operate

2 3 4
20 sec. 30 sec. 45 sec.
Oven Lamp
Oven lamp will be turned on, when:
• door is opened.
• heating starts.
Oven lamp will be turned off, when:
• door is closed (no heating).
• heating finishes.
5 6 7
1 min.
1 min. 2 min.
30 sec.
Stop/Reset Pad
1. While heating, one touch on the
2. One touch on the Stop/Reset
- 12 -
8 9 0
2 min. 3 min.
3 min.
30 sec. 30 sec.
Stop/Reset Pad stops the oven.
You can restart by pressing the
Start Pad or a second touch on
the Stop/Reset Pad will cancel
the selected program.
Pad, before the heating cycle is
started, will cancel the selected
program.
2020/11/25 10:37:17