How To Use; Setting Language - Dreame V11 Dreametime Benutzerhandbuch

How to Use

EN
Function introduction of Display Screen
Eco
Note: If you need to pay attention to any abnormality during the use of the product, a
prompt will appear on the screen. You should follow the instructions on the screen to keep
the performance normal.

Setting Language

Press and hold for 3 seconds to enter the language selection interface
Click to scroll through the language list, select a language
And then press
Note: If there is no operation for more than 5 seconds, the display will be turn off.
10
and hold for 3 seconds to save your setting
Electronic Lock/Reset Filter
• Press briefly to enter/exit the lock status
• Press and hold for 1.5 seconds to enter the filter
reset interface
Battery Level Monitor Ring
• Blue: Battery level is more than 20%
• Red: Battery level is less than 20%
Switching Suction Level/Setting Language
• Click to switch between Eco Mode, Med Mode, and
Turbo Mode
• Press and hold for 3 seconds to enter the language
setting interface