Tape Operations; Listening To A Cassette - JVC KS-FX202 Bedienungsanleitung

Listening to a cassette

You can play back type 1 (normal) tapes.
1
Turn on the power.
Note on One-Touch Operation:
If a cassette is already in the cassette
compartment, tape play starts automatically.
However, it is not recommended to leave the
cassette in the compartment when turning off
the power or ignition key. It may damage the
tape head and the cassette.
2
Insert a cassette into the cassette
compartment.
When one side of the tape
reaches its end during play,
the other side of the tape
automatically starts playing
(Auto Reverse).
3
Select the tape direction.
Press both buttons at the
same time. Each time you
press both buttons, the tape
direction changes
alternately—forward
(
(

TAPE OPERATIONS

To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically
ejects from the cassette compartment. The
source changes to the previously selected one.
• You cannot change the source if the cassette is
• You can also eject the cassette by pressing 0
To fast-wind a tape
Press in ¡ or 1.
The tape will be wound in the direction of the
arrows (¡ or 1).
To restart playback, lightly press the other
) and reverse
button which is not pressed in (1 or ¡).
).
still in the cassette compartment.
To change the source, you must eject the
cassette first.
while the unit is turned off.
Tape direction
11