Using Standby Reception - JVC KS-FX473R Bedienungsanleitung

The same programme can be received on
different frequencies.
Programme 1
broadcasting
on frequency A
Programme 1
broadcasting
on frequency B

Using Standby Reception

Standby Reception allows the unit to switch
temporarily to your favorite programme (PTY:
Programme Type) and Traffic Announcement (TA)
from the current source (another FM station, tape,
or CD changer (only for KS-FX473R/KS-FX470R).
• Standby Reception will not work if you are listening
to an AM station.
TA Standby Reception
When you press TP RDS (for KS-
FX473R/KS-FX470R) or TP (for
KS-F363R/KS-F360R) while
listening to an FM station, the TP
KS-FX473R
indicator is lit during reception of
KS-FX470R
a TP (Traffic Programme) station
and the TA standby mode is
engaged.
KS-F363R
KS-F360R
• When the station being received is not a TP station,
the TP indicator flashes. Press 4
KS-FX473R/KS-FX470R) or
KS-F360R) to engage the TA standby mode.
"SEARCH" appears on the display, and TP station
search starts. When a TP station is tuned into, the TP
indicator is lit.
10
Programme 1
broadcasting
on frequency E
Programme 1
broadcasting
Programme 1
on frequency C
broadcasting
on frequency D
¢ (for
/
/ (for KS-F363R/
7 If you are listening to a cassette (or CD
changer: only for KS-FX473R/KS-FX470R) and
wish to listen to a TP station, eject the cassette
and press TP RDS or TP to enter the TA
standby mode. (The TP indicator lights up.)
If a traffic programme starts broadcasting while the
TA standby mode is active, "TRAFFIC" appears and
the playback source changes to the FM band. The
volume increases to the preset TA volume level (see
page 13) and the traffic programme can be heard.
To deactivate the TA standby mode, press TP
RDS or TP.
PTY Standby Reception
When you press PTY while listening to
an FM station, the PTY indicator is lit
during reception of a PTY station and
the PTY standby mode is engaged. The
selected PTY name stored on page 11
flashes for 5 seconds.
• When the station being received is not a PTY station,
the PTY indicator flashes. Press 4
(for KS-FX473R/KS-FX470R) or
F363R/KS-F360R) to engage the PTY standby mode.
"SEARCH" appears on the display, and PTY station
search starts. When a PTY station is tuned into, the
PTY indicator is lit.
7 If you are listening to a cassette (or CD
changer: only for KS-FX473R/KS-FX470R) and
wish to listen to a selected PTY broadcast,
eject the cassette and press PTY to enter the
PTY standby mode. (The PTY indicator lights
up.)
If the selected PTY programme starts broadcasting
while the PTY standby mode is active, the selected
PTY name appears and the playback source
changes to the FM band. The selected PTY
programme can then be heard.
To deactivate the PTY standby mode, press PTY
again.
¢
/
/ (for KS-