Focusing The Reticle; Reticle Illumination - Zeiss Conquest V4 serie Gebrauchsanleitung

(3)

Focusing the reticle

Turn the eyepiece (1) to focus the reticle.
Note: A rubber ring (2) has been attached to the eyepiece to avoid injury.
Note: For low-light or night use:
at the top.
(1)
(2)
(3) on the eyepiece tubes.

Reticle illumination

Illumination is activated by turning the adjustment knob (5). The brightness can
now be increased by turning the knob clockwise. The brightness can be reduced by
turning the knob counterclockwise. The regulation takes place in 10 steps. Switching
Note:
(5)
13 | 225 EN