Operation; Daily Use - Zanussi ZXAN13EW0 Benutzerinformation

12. Install the rubber support on the side with no
hinge.
13. Fit the door on the lower hinge making sure the
hinge pin enters the door bottom hole.
14. Install the upper hinge on the opposite side of
the appliance. Fit the upper hinge pin into the
door upper hole. Tighten the screws.
15. Screw the remaining 2 screws on the top side
of the appliance with no hinge.

OPERATION

SWITCHING ON
1. Insert the plug into the wall socket.
2. Turn the temperature regulator clockwise to a
medium setting.
SWITCHING OFF
To turn off the appliance, turn the temperature
regulator to the "O" position.
You can also unplug the appliance.
TEMPERATURE REGULATION
The temperature is regulated automatically.
However, you can set a temperature inside the
appliance yourself.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:

DAILY USE

WARNING! Refer to Safety chapters.
REMOVING AND INSTALLING THE DOOR
SHELF
To remove the door shelf:
1. Hold the left side of the shelf.
16. Place the top cover on the appliance and
tighten the screws on the back.
Install the door equipment.
Wait at least 4 hours before connecting the
appliance to the power supply.
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most suitable
one.
To operate the appliance:
1. Turn the temperature regulator clockwise to
obtain a lower temperature inside the
appliance.
2. Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.
Setting "O" means that the appliance is switched
off.
53